Internal Glass Blinds

Internal Blinds can be used on a variety of glass units. Please see below for limitations.

The magnetic blinds are operated by an easy to use, neat magnet slider to raise, tilt and lower the blinds inside the sealed unit.

There are two types of Venetian blinds suitable for the glazing cavity: 24mm unit and 28mm unit.

These blinds require a cavity of 16mm so when used with 2x 4mm Low E glass a 24mm unit is achieved. This could also be incorporated within triple glazed units.

The slim blinds are unique as they can be used in conjunction with Georgian Blinds.

A standard unit would comprise of:

4mm Low E / 16mm Argon Gas Filled Cavity with Blind / 4mm Toughened Clear = 24mm

These blinds require a cavity of 20mm so when used with 2x 4mm Low E glass a 28mm unit is achieved. This could also be incorporated within triple glazed units.

A standard unit would comprise of:

4mm Low E / 20mm Argon Gas Filled Cavity with Blind / 4mm Toughened Clear = 28mm

Magnetic Blind Colour Options

These blinds are available in eleven standard colour choices. Please note that these colours are representative only, please ask for a colour swatch if in any doubt.

All units below 350mm height are Tilt only.

All blinds over 350mm height and Lift and Tilt as standard.

Size Limitations up to 1700mm high:

Size Limitations between 1700mm high and 3000mm high:

As you will see from the above limitations, the higher the unit size the smaller you can have the unit in the width, e.g: A blind 1700mm high can have a max width of 1500mm however a blind unit of 1710mm would have a max width of 1200mm.